http://www.armstrongag.com/prodimages/3mbb.pdf	Medium Hinged Back Box Blades The Medium Hinged Back Box Blades have 3/8 plate hitch, 3/8' thick end plates and 1/4" thick back plate. The rear blade is hinged. Category I & II 3-Point Hitch. (clevis type).
http://www.armstrongag.com/prodimages/5standardbox.pdf	Standard Duty & Lt Box Blades Standard Duty Box Blade has 1/4" end plates and back plate. Reversible 1/2" x 6" high carbon steel cutting edge. Lt Box Blade has end plates and back plate are made of 3/16" steel.
http://www.armstrongag.com/prodimages/4HBB.pdf	Heavy Duty Box Blades Heavy Duty Box Blade has 3'8" thick back plate and 1/2" thick end plates. Reversible front and rear cutting edges. The shank bars are 4" deep to help reinforce the scarifier shanks.
http://www.armstrongag.com/prodimages/11CHARROW.pdf	Chain Harrows With Flexible 2 way design. Front and Back Pull Bars 2 - 7/8" x 1/4" Wall Pipe. Mats are 5/8" Round Stock. Heat Treated. All Pull Bars and Chain Splices are attached with quick links for tangle free operation. Complete with Pull Chain and Clevis.
	Chain Harrows Carrier The Cat. 1 3pt. Hitch CH carrier fits CH 4, 8, 12, 16. Great for arenas or transporting.
	3 Pt. Rear Angle Blade Rear Angle Blades are reversible for use in dragging and pushing. 1/2 x 6" high carbon blade is also reversible. Cat.I hitch. 2 1/4" pivot shaft.
	3 Pt. Rear Tilt/Angle Blade Rear tilt/angle blades are reversible for use in dragging and pushing. 1/2 x 6" high carbon blade is also reversible. Cat.I and Cat. II. Stronger clevis hitchpins
	Landscape Rakes These rakes have the same heavy duty hitch as out rear blades. Quick angle adjustment with pull of pin. (Reversible for drag or push.) High carbon steel bolt on times.
	Heavy Duty Discs Heavy Duty 3-Point Discs are fully adjustable with quick pull pins. Built with heavy channel and square tubing frame that is designed to give years of dependable service.
	Medium Disc - 3 Point Rigid angle iron and rectanglar tube frame. Adustable cutting angles. Greasable ball bearings on 1" square axle. 7 1/2 disc spacking.
	Pasture Renovator Heavy 4" sq. tube frame. Each shank is shear bolt protected. 17" Flutted Coulters Shanks - 3/4" x 2 1/2" on 15" center
	3-Point Left Boom 3 Point Lift Boom is built from 2-7/8” diameter pipe. The 3-point lift can carry a load up to 800 lb. max. The lift weighs 60 lbs.
	3-Point Seeder/Spreader 2 models : Painted and Galvanized 3-Point Hitch, PTO Driven. It has a 500 lb capacity. Maximum spread width is up to 52'.
	3-Point Spear - Model 1500 3-point spear has a 2-1/4" in diameter 48" long center spear that is tapered for easy entry into the bale. The two 1-1/2" stabilizer spears keep the round bale stationary on the center spear.
	Bucket Mounted Spear - Model 3500 Bucket Mounted Spear allows you to stack 2000 lb. round bales without the hassle of removing your front end loader bucket.
	Heavy Duty 3 Pt. Fork - Model 2000 Heavy duty 3-Point fork is designed for many years of trouble free use. Over 10,000 of these units are currently in use. Available in category I or II 3-point hitch.
	Front End Loader Spear - Model 2500 Available with adjustable brackets or with brackets for loaders with quick attach buckets.(QA) Sturdy enough to carry 2000 lb.
	Front End Loader Spear - Model 5500 Designed to safely load and stack large square bales. It is available with adjustable brackets or with brackets for loaders with quick attach buckets.
	Tool Bar Package Includes Tool Bar, Bedders, and Sweeps.